[j-nsp] Strange no memory issue on 10.0R3.10

[Michel de Nostredame]

But... JUNOS 9.3 has problem on the enhanced-switching mode,

I have following config in chassis section,
fpc 6 {
    pic 0 {
        ethernet {
            pic-mode enhanced-switching;
        }
    }
}

as soon as I commit, following error bumps up,

Sep 21 23:54:54  xxxx chassisd[889]: CHASSISD_FRU_OFFLINE_NOTICE:
Taking FPC 6 offline: Restarted by cli command
Sep 21 23:54:54  xxxx chassisd[889]: CHASSISD_IFDEV_DETACH_FPC: ifdev_detach(6)
Sep 21 23:54:54  xxxx chassisd[889]: CHASSISD_IFDEV_DETACH_FPC: ifdev_detach(6)
Sep 21 23:54:55  xxxx chassisd[889]: CHASSISD_SNMP_TRAP10: SNMP trap
generated: FRU power off (jnxFruContentsIndex 8, jnxFruL1Index 7,
jnxFruL2Index 1, jnxFruL3Index 0, jnxFruName PIC: 8x GE uPIM @ 6/0/*,
jnxFruType 11, jnxFruSlot 6, jnxFruOfflineReason 1, jnxFruLastPowerOff
0, jnxFruLastPowerOn 0)
Sep 21 23:55:03  xxxx chassisd[889]: CHASSISD_SNMP_TRAP10: SNMP trap
generated: FRU power on (jnxFruContentsIndex 8, jnxFruL1Index 7,
jnxFruL2Index 1, jnxFruL3Index 0, jnxFruName PIC: 8x GE uPIM @ 6/0/*,
jnxFruType 11, jnxFruSlot 6, jnxFruOfflineReason 2, jnxFruLastPowerOff
1218828013, jnxFruLastPowerOn 1218828814)
Sep 21 23:55:03  xxxx chassisd[889]: CHASSISD_PIC_HWERROR: PIC 0 in
FPC 6 (PIC type 1586, version 269) had hardware error
Sep 21 23:55:03  xxxx chassisd[889]: CHASSISD_SNMP_TRAP7: SNMP trap
generated: Fru Failed (jnxFruContentsIndex 8, jnxFruL1Index 7,
jnxFruL2Index 1, jnxFruL3Index 0, jnxFruName PIC: 8x GE uPIM @ 6/0/*,
jnxFruType 11, jnxFruSlot 6)
Sep 21 23:55:03  xxxx alarmd[890]: Alarm set: PIC color=RED,
class=CHASSIS, reason=FPC 6 PIC 0 Failure
Sep 21 23:55:03  xxxx craftd[891]:  Major alarm set, FPC 6 PIC 0 Failure
Sep 21 23:55:03  xxxx fwdd[900]: YUKON-BED(6/0): Failed to get VLAN ifd
Sep 21 23:55:03  xxxx fwdd[900]: YUKON-BED(6/0): VLAN ifd init failed
Sep 21 23:55:03  xxxx fwdd[900]: L2S-8xGE(6/0): back-end device pic init failed
Sep 21 23:55:03  xxxx fwdd[900]: CM_FWDD: FPC 6 PIC 0 INIT failed
Sep 21 23:55:03  xxxx fwdd[900]: CM_FWDD: Error initializing FPC 6 PIC
0, ID 0x0632
Sep 21 23:55:03  xxxx fwdd[900]: CMLC: 'PIC Online ack' (opcode 148) failed
Sep 21 23:55:03  xxxx fwdd[900]:   slot 6; failed to online PIC 0


When I change to routing mode, everything works fine.
fpc 6 {
    pic 0 {
        ethernet {
            pic-mode routing;
        }
    }
}


My OS is 9.3r3.8 and 9.3r4.4 on J6350 packet-mode. When I contact
JTAC, the only answer I got is OS upgrading, but I need packet-mode
OS. Any one experienced same issue on enhanced-switching?
--
Michel~


On Tue, Sep 21, 2010 at 2:35 PM,  <sthaug at nethelp.no> wrote:
>> > I have 2 x J4350's with 2 BGP feeds and each receiving about 320k routes
>> > with 1GB of RAM and I have no issues.  My max RAM usage is 253MB.  I'm
>> > running JunOS 10.1R2.8.
>>
>> Hmmm.
>>
>> Why 10.1R2.8 release? Juniper advice is to use 10.0R3.10 on every J device.
>
> There are of course those of us who refuse to have anything to do with
> the flow-based versions for the J-series, and therefore stay at 9.3R3.8
> (the last "classical" release of JunOS for the J series).
>
> At least they're nice lab boxes...
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>