[j-nsp] "Yellow led" and "Red led" alarms in Juniper

[Martin T]

In addition, has anybody used those alarm relays on craft interface?
If yes, then how? Connect a blinker? :-)


regards,
martin


2011/4/5 Martin T <m4rtntns at gmail.com>:
> I see. And as I understand, there is no SNMP OID for "set chassis
> alarm services rx-errors", "set chassis alarm ethernet link-down",
> "set chassis alarm management-ethernet link-down" etc, but one should
> configure the threshold value for those alarms(ignore/red/yellow) and
> monitor "yellow alarm" and "red alarm" alerts in NMS(for example
> Nagios)? Which means each time for example "red alarm" appears in NMS,
> it may have multiple meanings?
>
>
> regards,
> martin
>
> 2011/4/5 Masagung Nugroho <masagung at trinetprimasolusi.net>:
>> Yellow led is minor alarms
>> Red led is major alarms
>> When first configuration yellow indicate the rescue configuration is not set
>>
>> Best Regards,
>> -Masagung Nugroho-
>>
>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net
>> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Ido Szargel
>> Sent: Tuesday, April 05, 2011 11:58 AM
>> To: Martin T; juniper-nsp at puck.nether.net
>> Subject: Re: [j-nsp] "Yellow led" and "Red led" alarms in Juniper
>>
>> Hi Martin,
>>
>> You have the "set chassis alarams" stanza where you can play with the
>> chassis alarms levels (yellow/red/ignore)
>> The most useful thing I use is to turn off the red alarm about the MGMT
>> interface not connected to anything on EX switches.
>>
>> Regards,
>> Ido.
>>
>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net
>> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Martin T
>> Sent: Tuesday, April 05, 2011 2:26 AM
>> To: juniper-nsp at puck.nether.net
>> Subject: [j-nsp] "Yellow led" and "Red led" alarms in Juniper
>>
>> As far as I know, all Juniper routers have "Yellow led" and "Red led"
>> indicators on "craft interface". Few examples:
>>
>> http://www.juniper.net/techpubs/software/nog/nog-hardware/html/craft-interfa
>> cea11.gif
>> http://www.juniper.net/techpubs/software/nog/nog-hardware/html/craft-interfa
>> cea4.gif
>> http://www.juniper.net/techpubs/software/nog/nog-hardware/html/craft-interfa
>> cea8.gif
>>
>> ..and one photo as well:
>>
>> http://blog.gyron.net/wp-content/uploads/mx240_right_low.png
>>
>> As I understand, yellow alarms are informative and red ones are critical.
>> However, which alarms classify as "Yellow" and which ones classify as "Red"?
>> Is there a possibility to change those thresholds?
>>
>>
>> regards,
>> martin
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
>