[j-nsp] Weird MX80 Boot Error

[sthaug at nethelp.no]

> During the initial posting on an MX80 I keep seeing this:
> 
>  
> 
> FLASH:  8 MB
> 
> L2 cache 1MB: enabled
> 
> *** Warning - bad CRC, using default environment
> 
>  
> 
> Is this an actual error or something to be concerned about?

We're seeing the same thing. Haven't gotten any answer yet as to
whether this is expected or not.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no
----------------------------------------------------------------------

U-Boot 1.1.6 (Feb  3 2010 - 11:57:02)

CPU:   8572, Version: 2.1, (0x80e00021)
Core0:  E500, Version: 3.0, (0x80210030)
Clock Configuration:
       CPU0:1333 MHz,        CPU1:1333 MHz, CCB: 533 MHz,
       DDR: 267 MHz (533 MT/s data rate) (Synchronous), LBC:  33 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
Board: MX80 1.6
CPLD:  Version 0x1c
DRAM:  Initializing  -     DDR: 2048 MB
Testing DRAM from 0x00000000 to 0x80000000
DRAM test phase 1:
DRAM test phase 2:
DRAM test passed.
Now running in RAM - U-Boot at: 0ffa0000
Enable CPLD Watchdog
POST: U-boot memory location PASSED

Scaning PCIE bus:

Scanning PCI Express` Bus .. for bus 0
    Found(0.0.0), (0x1957,0x41) Class(0xb20) :MPC8572 PCIE Controller
    BAR0 = 0xc0000000

Scanning PCI Express` Bus .. for bus 1
    Found(1.0.0), (0x10b5,0x8112) Class(0x604) :PEX8112 PCIe-to-PCI Bridge
    BAR0 = 0xc0100000    BAR1 = 0x0

Scanning PCI Express` Bus .. for bus 2
    Found(2.1.0), (0x1033,0x35) Class(0xc03) :uPD720101/2 USB(OHCI) Controller
    BAR0 = 0xc0200000
    Found(2.1.1), (0x1033,0xe0) Class(0xc03) :uPD720101/2 USB(EHCI) Controller
    BAR0 = 0xc0201000
 ----------- PCIE scan complete, last bus = 2 ------------

FLASH:  8 MB
L2 cache 1MB: enabled
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
Net:   fxp0: PHY is Marvell 88E1112S (1410c97)
me0, em0, fxp0 [PRIME], em1


ELF file is 32 bit
Loading .text @ 0x00010080 (176156 bytes)
Loading .rodata @ 0x0003b09c (14008 bytes)
Loading .rodata.str1.4 @ 0x0003e754 (15716 bytes)
Loading set_Xcommand_set @ 0x000424b8 (88 bytes)
Loading .rodata.cst4 @ 0x00042510 (12 bytes)
Loading .data @ 0x00043000 (13896 bytes)
Loading .sdata @ 0x00046648 (80 bytes)
Clearing .sbss @ 0x00046698 (264 bytes)
Clearing .bss @ 0x000467a0 (9232 bytes)
## Starting application at 0x00010080 ...