[j-nsp] configure bandwidth limitation on EX3200

[Maarten Carels]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 21 Apr 2011, at 10:09 , Ala' Amira wrote:

> Good morning all,
> 
> 
> 
> Am trying to add bandwidth limitation on EX3200 on port or vlan  using
> firewall policer and it is working as input filter correctly but when I do
> it as  output filter  it gave me an  error " can not be used as policer not
> supported on egress " .
> 

I ran into the same. It's a limitation of the EX-3200...

SO, short answer is: You can't.

- --maarten

-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.17 (Darwin)
Comment: GPGTools - http://gpgtools.org

iQEcBAEBAgAGBQJNr/UHAAoJEHXc8jAmoaIoxe8H/1xiTA4lq+Bfq52Btm1b6Vmr
ntqyi7TstMx2KQmdh5Weqj8lriHXh1Q2/ed7kT1KjaIYifonTPo88hlCsLH6V9Hz
exAQXYpFOW6cOKemQs811WJv+jut+UKAOqMrSySeBrQJFg5Z/aHR+7rNOx1Mor/T
GjO2wYIp78zUD0LKk+nEdbZUZys1dXIA9lBl6D+59q3RbzHf8dHv1z4Dbz0xQint
9dXg4Tqcd6fz6qqCjBCrGgQdpIqOVEoX/MQgz6NkEXcVCS0Vnrcy9bmxbzk7hCXM
oLKsOhFiJHEMjTwFfjMgq9sE4sgr1vBRDbcn0CKFJqyBKdyJdNbttIyqAr6H/H4=
=rN2q
-----END PGP SIGNATURE-----