[j-nsp] MX: bridge-domains and l2circuit

Jonas Frey (Probe Networks) jf at probe-networks.de
Thu Aug 18 02:03:25 EDT 2011


Hello all,

i am trying to build a l2circuit on a MX. The problem is that the vlan
that needs to be included in the l2circuit comes via xe-1/0/0 which is
configured in bridge mode:
unit 0 {
    family bridge {
        interface-mode trunk;
        vlan-id-list [ 20 30 40 ];
    }

I need to build this l2circuit with vlan 20.

However when configuring the l2circuit i do not have a interface to use
as the bridge doesnt create any subinterface for the vlan.

neighbor xxx {
    interface ??? {
        virtual-circuit-id 20;


I cant configure any subinterface on xe-1/0/0 (like unit 1....) because
bridge mode prohibits that. 

How can i get this to work?

Best regards,
Jonas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20110818/697900a2/attachment.pgp>


More information about the juniper-nsp mailing list