[j-nsp] [m10i] PIC-FPC throughput

[Nick Kritsky]

Hi all,

>From the Juniper documentation I know that there is a throughput limitation
of 3.2 Gbps per FPC on m10i routers. Does it mean that there is 800Mbps
limitation on each PIC inserted in PIC slot on given FPC? Or is it an
aggregate limitation. To give you the real life example - should I be
worried if total usage on 4 interfaces of ge-0/0/* wants to go over 1G, if
the total usage of ge-0/*/* is still below 2G. If that matters, the PIC in
question is IQ2.

any help is very good.
thanks
Nick Kritsky