[j-nsp] Untagged VLAN question

[Frédéric Gabut-Deloraine]

Remove it from vlan members

-- 
Frederic Gabut-Deloraine
Network Engineer
NEO TELECOMS
AS8218
21 rue La Boetie
75008 Paris
Tel : +33 1.49.97.07.47
Mob : +33 6.15.07.10.30
skype : fgabutdeloraine

Le 20 déc. 2011 à 20:35, "Chris Adams" <cmadams at hiwaay.net> a écrit :

> I've got a server connected to an EX4200 switch.  Its port is in VLAN 9
> called "misc".  All is well.  The interface config looks like:
> 
> unit 0 {
>    family ethernet-switching {
>        port-mode access;
>        vlan {
>            members misc;
>        }
>    }
> }
> 
> Now I want to enable IPMI on the server on a separate LAN segment.  This
> is done on the server hardware with a VLAN on the BMC; tagged traffic in
> the specific VLAN (30, named "ipmi") is separated for IPMI (the server
> OS never sees it), and the rest goes to the server.  I want to keep VLAN
> 9 untagged (so the OS sees it just the same as before).  I tried:
> 
>    unit 0 {
>        family ethernet-switching {
>            port-mode trunk;
>            vlan {
>                members [ misc ipmi ];
>            }
>            native-vlan-id 9;
>        }
>    }
> 
> Now the IPMI LAN is active, but the packets to the server on VLAN 9 are
> also tagged (so the server doesn't see them).  It looks like
> native-vlan-id only sets the VLAN for inbound untagged packets.  How do
> I get VLAN 9/misc packets sent untagged on this port?
> -- 
> Chris Adams <cmadams at hiwaay.net>
> Systems and Network Administrator - HiWAAY Internet Services
> I don't speak for anybody but myself - that's enough trouble.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp