[j-nsp] EX-4200 mixed DC/AC power supply

[bt@paulen.net]

I think this is supported after a given release - 11.something..?

/bt at mobil

----- Reply message -----
Fra: "Jim Glen" <jim.glen at codonis.com>
Til: <maeve2009 at gmail.com>
Kopi: <juniper-nsp at puck.nether.net>
Emne: [j-nsp] EX-4200 mixed DC/AC power supply
Dato: ons., des. 21, 2011 00:45


I've done this on both the EX-4200 and the MX480 systems, it's not recommended by Juniper but it works, I've also mixed 110v and 208v with no problems. 
JimG


On Dec 20, 201152354, at 2:59 PM, maeve2009 at gmail.com wrote:

> Dears
> 
> We have to install a secondary power supply on a pair of Ex4200 switches.
> 
> 
> It is possible to mix the power supplies (dc/ac on the same chassis) without any special requirement?.
> 
> I don't see any documentation abording this matter, and probably it can be done withou problems
> 
> Anybody has been done this before ?
> 
> Any comment will be appreciated
> 
> Thanks in advace
> 
> Mario
> Enviado desde BlackBerry® de COMCEL S.A.
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp







_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp