[j-nsp] fxp0 configuration under groups.

[Phil Shafer]

Keith writes:
>I was wanting to setup redundant RE's so following Juniper's 
>documentation it shows:
>set groups re0
>edit groups re0

Please let me know where this is in the docs, since you
don't need the first step.  It's harmless, but editing
a point on the config hierarchy is sufficient to create it.

>As I am 100 miles away from this box, if I set interfaces under the 
>groups, will it move the fxp0 I am using now on RE0 to the group and 
>kill my connectivity?

Others have pointed out that you need to apply the config group,
but we sure to use "show | display inheritance" to check that the
final config is what you're expecting and that nothing in the
foreground config is interfering with your config groups.

>I should probably only do this locally as I have used commit confirmed 2 
>a few times as I have managed to lock myself out of the router twice now.

Config-releated lock outs is exactly what "commit confirmed" was
supposed to avoid.  Is something not working?

Thanks,
 Phil