[j-nsp] EX2200 series and q-in-q (802.1ad)

Michael Hare michael.hare at doit.wisc.edu
Wed Feb 2 11:51:31 EST 2011


Furthermore, on ex3200/ex4200, as of a few months ago, the inner and 
outer tpid's had to be the same, making interoperability with rfc 
compliant 802.1ad implementations [F10] not possible.  YMMV, I filed an 
ER but I don't think it went anywhere.

-Michael

On 2/2/2011 10:02 AM, Dan Wilkinson wrote:
> I think its only supported on EX3200 and EX4200
>
>
>
> --
>
> Best regards
>
> Dan
>
>
>
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Stephane JAUNE
> Sent: 02 February 2011 15:50
> To: 'Juniper-Nsp'
> Subject: [j-nsp] EX2200 series and q-in-q (802.1ad)
>
>
>
>
>
>          Hi all,
>
>          Does somebody know if EX2200 series support q-in-q ? we would like
> to use some of them to tag customer traffic with a S-VLAN, and I only found
> that 802.1Q is supported.
>
>
>          Regards.
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>    _____
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1435/3417 - Release Date: 02/01/11
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list