[j-nsp] MPLS LSP Load Balance

Matthew Tighe matthew.e.tighe at gmail.com
Thu Feb 3 11:13:23 EST 2011


I think you may to do this for LDP LSPs. My experience is with RSVP LSPs but
the concept should be the same. Multiple LSPs are needed to load balance.
Seems like this command does that with LDP:

http://www.juniper.net/techpubs/en_US/junos10.4/topics/usage-guidelines/mpls-configuring-fec-deaggregation.html

<http://www.juniper.net/techpubs/en_US/junos10.4/topics/usage-guidelines/mpls-configuring-fec-deaggregation.html>

On Thu, Feb 3, 2011 at 7:54 AM, Ezequiel Carson <ezequiel at ifxcorp.com>wrote:

> Matthew,
>
> Our lsp's arw dinamicaly built using ldp.
>
> this issue is happening when you the router receives an incomming mpls
> packet (labeled).
>
> Resuming: once the router has placed the label 112233 on interfaces X,Y and
> Z , every single packet will be routed using the same interface ex: X and
> never will use Y or Z
>
> We already have configured the forwarding-option hash algorith but is not
> working
>
> Txs
> Ezequiel
>
> ------------------------------
>  *From*: Matthew Tighe <matthew.e.tighe at gmail.com>
> *To*: Telmo Di Leva
> *Cc*: juniper-nsp at puck.nether.net <juniper-nsp at puck.nether.net>; Ezequiel
> Carson; Andres Arturo Diaz Montes
> *Sent*: Thu Feb 03 10:47:27 2011
> *Subject*: Re: [j-nsp] MPLS LSP Load Balance
>
> Do you have multiple LSPs defined (one for each path you want to load
> balance over)?
>
> On Tue, Feb 1, 2011 at 6:46 PM, Telmo Di Leva <tdileva at ifxcorp.com> wrote:
>
>> Dear JNSP, in this oportunity we are contacting you because we have the
>> following trouble:
>> Our core plataform is based on M20 and M160.
>> For some reason, we cant balance mpls traffic thru multiples oc3.
>> We have this links explaining our limitation whit M series:
>>
>> http://www.juniper.net/techpubs/en_US/junos9.5/information-products/topic-collections/config-guide-mpls-applications/mpls-configuring-load-balancing-for-mpls-lsps.html
>> Note: You can include this combination of statements on M320 and T-series
>> routing platforms only. If you include them on an M-series router, only the
>> first MPLS label and the IP payload are used in the hash key.
>> Can this would be a problem to balance traffic in our backbone?
>> We cant find a way to fix the unbalanced mpls traffic.
>> Is corrected in some JUNOS version for M series?
>> We will really apreciate your help.
>> Bes regards.
>>
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
>
> --
> Matthew Tighe
> matthew.e.tighe at gmail.com
>
>


-- 
Matthew Tighe
matthew.e.tighe at gmail.com


More information about the juniper-nsp mailing list