[j-nsp] Multicast Issues with a Logical System

[Nilesh Khambal]

Is multicast (PIM dense mode) enabled in fe-0/2/0.12 inside LS1?
Can you do "show pim interfaces logical-systems LS1"?


- Nilesh


On 1/19/11 2:33 PM, "Vladislav Vasilev" <vvasilev at vvasilev.net> wrote:

> Hello,
> 
> I am trying to figure out what is wrong with the following setup:
> 
> Streamer (239.1.2.3) ---> fe-0/2/0.129 (Logical System 1) fe-0/2/0.12
> <---> fe-0/2/1.21 (Logical System 2) ---> Receiver
> 
> I have the following configuration on LS1:
> 
> r1 at M5:r1# run show configuration protocols pim
> interface fe-0/2/0.129 {
>     mode dense;
>     version 2;
> }
> 
> The multicast traffic is hitting the fe-0/2/0.129 interface but the
> router is not populating its mroute table:
> 
> r1 at jncie:r1# run show multicast route
> Family: INET
> 
> Family: INET6
> 
> Even if I try to put the mcast group as a static group on either LS1
> or LS2 it does not make it in the mroute table.
> 
> I am running JunOS 9.3R4.4.
> 
> Thanks!
> 
> Best Regards,
> V.Vasilev
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp