[j-nsp] OT: olive and ubuntu 10.10

[Cristian Frizziero]

Hi!!

Look, I could install JUNOS10.0R3.10 on Ubuntu10.10 with qemu 0.11.0, 
and using the FreeBSD4.11-mini.iso (it was not necessary the 6.0 or 
later version, because JUNOS will re-built automatically the file system 
during its installation).

I used the following instructions (there was some steps wrong, so I had 
to think a lot in some cases, but generally, it's the best I found on 
the web).

http://blog.gns3.net/2009/10/olive-juniper/

Hope it helps!!!<mailto:cristian.frizziero at iquall.net>

Cristian






<http://www.iquall.net>
El 23/01/2011 15:39, bit.gossip at chello.nl escribió:
> running into the error described here:
> (null)() at0
> dog: ERROR - reset of uninitialized watchdog
> dog: ERROR - reset of uninitialized watchdog
>
> http://inetpro.org/wiki/Using_QEMU_with_Olive_to_emulate_Juniper_Routers#Watchdog_panic_immediately_after_boot
>
> But I am also not able to apply the fix because when I compile the bios I get the following error:
>    Linking out/rom16.o
> out/romlayout16.lds:431 cannot move location counter backwards (from 0000000000006590 to 0000000000000000)
> make: *** [out/rom16.o] Error 1
>
>
> Anyone able to send me a working bios with the fix or helping in any way.....
>
> Thanks!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp