[j-nsp] MX480 JunOS version.

[Keith]

On 1/28/2011 2:16 PM, Richard A Steenbergen wrote:
> On Fri, Jan 28, 2011 at 02:03:54PM -0800, Keith wrote:
>>
>> Currently the box is running 10.2R1.8. It has a MIC-3D 20 port card,
>> MPC1, and RE-S-2000.
>
> Juniper just put out a tech bulletin this morning admitting the obvious,
> that 10.2R1/R2/R3 and 10.3R1 for Trio (MPC) cards are massively broken
> and shouldn't be used. Try 10.3R2, it's been mostly ok for us (not
> counting the bug we hit the other day where all the MPCs crashed in an
> endless loop after updating a prefix-list referenced in a firewall
> filter on them, but at least so far this seems rare :P). Alas 10.3R3
> seems to be delayed, but you'll be far better off with 10.3R2 than you
> will with 10.2R1 in the config above.
>

Thanks Richard. I see that 10.4R1.9 is out. Have you had a go at that 
version yet?

Regards,
Keith