[j-nsp] MX480 JunOS version.

[Joel Jaeggli]

On 1/28/11 2:35 PM, Keith wrote:
> On 1/28/2011 2:16 PM, Richard A Steenbergen wrote:
>> On Fri, Jan 28, 2011 at 02:03:54PM -0800, Keith wrote:
>>>
>>> Currently the box is running 10.2R1.8. It has a MIC-3D 20 port card,
>>> MPC1, and RE-S-2000.
>>
>> Juniper just put out a tech bulletin this morning admitting the obvious,
>> that 10.2R1/R2/R3 and 10.3R1 for Trio (MPC) cards are massively broken
>> and shouldn't be used. Try 10.3R2, it's been mostly ok for us (not
>> counting the bug we hit the other day where all the MPCs crashed in an
>> endless loop after updating a prefix-list referenced in a firewall
>> filter on them, but at least so far this seems rare :P). Alas 10.3R3
>> seems to be delayed, but you'll be far better off with 10.3R2 than you
>> will with 10.2R1 in the config above.
>>
> 
> Thanks Richard. I see that 10.4R1.9 is out. Have you had a go at that
> version yet?

I've got an outstanding bug on mx480 where rpd/vrrpd barf on  native
interfaces but not irb's in 10.4r1.9

> Regards,
> Keith
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>