[j-nsp] JUNOS upgrade to 10.4R4.5 on M10i

[Alex D.]

Michel,
thanks for the really quick reply. I also tried to upgrade to a "lower" 
JUNOS 10, but with the same result.

alex at test> ... /var/tmp/jinstall-10.0R3.10-export-signed.tgz no-validate
WARNING: Package jinstall-10.0R3.10-export-signed is not compatible with 
this hardware.
WARNING: Please install a package with version 7.4 or higher.

Which version did you use ?

Regards,
alex
> I had this problem today actually and went from 9.3 to 10.0 and then
> 10.4. I think there was a bulletin about it. Too lazy to look :)
>
> -Michael
>
> On 7/11/2011 3:52 PM, Alex D. wrote:
>> Hello folks,
>>
>> i want to upgrade a M10i (with RE-850 installed) to JUNOS 10.4R4.5.
>> When i try to install the software, i get the following error:
>>
>> alex at test> request system software add
>> /var/tmp/jinstall-10.4R4.5-domestic-signed.tgz no-validate
>>
>> WARNING: Package jinstall-10.4R4.5-domestic-signed is not compatible
>> with this hardware.
>> WARNING: Please install a package with version 7.4 or higher.
>>
>> In the release notes for 10.4R4.5 i saw that there's a compact flash
>> with 1G capacity needed since JUNOS 9.0. But an upgrade from 8.0R2.8 to
>> 9.3R1.7 worked without problems.
>>
>> alex at test> show version
>> Hostname: test
>> Model: m10i
>> JUNOS Base OS boot [9.3R1.7]
>> JUNOS Base OS Software Suite [9.3R1.7]
>> JUNOS Kernel Software Suite [9.3R1.7]
>> JUNOS Crypto Software Suite [9.3R1.7]
>> JUNOS Packet Forwarding Engine Support (M/T Common) [9.3R1.7]
>> JUNOS Packet Forwarding Engine Support (M7i/M10i) [9.3R1.7]
>> JUNOS Online Documentation [9.3R1.7]
>> JUNOS Routing Software Suite [9.3R1.7]
>>
>> Do you know the error mentioned above ?
>> Is it because of my 256MB compact-flash and what's the product number of
>> the compact-flash i need ?
>>
>> Regards,
>> Alex
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>