[j-nsp] dot1q CCC/MPLS on EX4200 series switches

[Alexander Frolkin]

Hi,

> I have a customer handing me a GigE with dot1q tags to my EX4200 switch.
> I need to carry the GigE/dot1q over a couple other EX4200s and terminate on
> a GigE port of my MX80.

I did something similar on an SRX:

-----
user at router> show configuration interfaces fe-0/0/6  
mtu 1800;
encapsulation ethernet-ccc;
unit 0;
-----

This a pseudowire carrying a dot1q trunk.

I suspect the config on an EX will be the same, but as I've said, I've
only tried on SRX.


Alex