[j-nsp] Cisco ASA to Junos Convertor
Altaf Ahmad
aahmad at bmc.com.sa
Mon Jun 20 05:40:38 EDT 2011
Many Thanks to Jof and Sivas,
I tried I2J tool but it does not translate the ASA commands to JUNOS. I
am having very big configuration ASA files which consist around 1000 +
Access list entries (ACEs) by using object-group and its really very
hard to manually translate huge number of lines in JUNOS. Is there any
suggestion to for this issue?
Regards,
Altaf Ahmad
-----Original Message-----
From: Jonathan Lassoff [mailto:jof at thejof.com]
Sent: Monday, June 20, 2011 8:00 AM
To: MSusiva
Cc: Altaf Ahmad; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Cisco ASA to Junos Convertor
On Sun, Jun 19, 2011 at 9:28 PM, MSusiva <ssiva1086 at gmail.com> wrote:
> Hi Altaf,
>
> Can you try IOS to JunOS translator tool?
>
> https://i2j.juniper.net/release/index.jsp
I2J is indeed a pretty awesome tool. It's probably a great tool for
Juniper SEs to pitch switching.
Unfortunately, Cisco PIXes and ASAs don't really run IOS. They may
borrow portions of code from one platform to the other, but the
configuration is totally different.
Altaf, you're best bet (in my opinion) would be to read over the JunOS
documentation for SRXes and start manually porting over your
configuration.
If you're really stuck after giving it a shot, maybe someone on this
list can help you out.
Cheers,
jof
More information about the juniper-nsp
mailing list