[j-nsp] Alarm for non-existant PEM

James S. Smith JSmith at WindMobile.ca
Mon Jun 20 16:40:32 EDT 2011


Just wondering if anyone has ever seen this.  We have an SRX3600 with two PEMs.  The show chassis environment looks like this normally:

node0:
--------------------------------------------------------------------------
Class Item                           Status     Measurement
Temp  PEM 0                          OK
      PEM 1                          Absent
      PEM 2                          OK
      PEM 3                          Absent


We had some maintenance on the weekend and PEM0 was going to lose power.  No issue, since PEM2 is there and has never had a problem.  The first part of the power outage went fine.  Then we had to have another power blip.  During the second power blip the chassis started complaining that PEM3 also had a problem and there wasn't enough PEMs to keep everything powered. We've never had a PEM3. At this point it started shutting down power to the FPCs.

> show log chassisd | match "Jun 19"
Jun 19 00:02:59 send: red alarm set, device PEM 0, reason PEM 0 Not OK
Jun 19 00:02:59 CHASSISD_PEM_INPUT_BAD: status failure for power supply 0 (status bits: 0x4); check circuit breaker
Jun 19 00:03:05 send: red alarm clear, device PEM 0, reason PEM 0 Not OK
Jun 19 01:31:00 send: red alarm set, device PEM 0, reason PEM 0 Not OK
Jun 19 01:31:00 send: red alarm set, device PEM 3, reason Too many PEMs missing
Jun 19 01:31:00 I2CS write cmd to FPC#0 [0x0], reg 0x7e, cmd 0x25
Jun 19 01:31:00 I2CS write cmd to FPC#0 [0x0], reg 0x12, cmd 0x5
Jun 19 01:31:00 I2CS write cmd to CB#0 [0x16], reg 0x13, cmd 0x9
Jun 19 01:31:00 a10_i2cs_assert_hard_reset: CB#0 - hard reset
Jun 19 01:31:00 recb_power_down_cpps: CPP in slot 0 is powered down
Jun 19 01:31:00 WARNING: not enough AC power supply (1), required 2
Jun 19 01:31:01 Setting scc context
Jun 19 01:31:01 lcc_a40_update_ch_info_on_fpc_detach: On SCC: recvd fpc detach for fpc 0 belonging to ch_id 1, marking pics empty in ch_info
Jun 19 01:31:01 ch_info_pic_state_blob_set: ch_id 1, addflag 0x0 key 0x1000006 num_spu 1 num_npc 1 app_mode 0x0 ioc_npc_map 0xaa ch_info_version 0x1
Jun 19 01:31:01 PIC[1][0] => ioc PIC Up
Jun 19 01:31:01 PIC[7][0] => cp-flow combo PIC Up
Jun 19 01:31:01 PIC[10][0] => npc PIC Up
Jun 19 01:31:01 ch_info_update: UPDATE ch 1, fpc_slot 0, pic_slot 0, state 0x0 SUCCEEDED
Jun 19 01:31:01 ch_info_update: fpc_slot 0, pic_slot 0, ioc_npc_map 0xa
Jun 19 01:31:01 CHASSISD_IFDEV_DETACH_FPC: ifdev_detach(13)
Jun 19 01:31:01 ifd ge-13/0/7 marked as gone
Jun 19 01:31:01 ifd ge-13/0/8 marked as gone
Jun 19 01:31:01 ifd ge-13/0/9 marked as gone
Jun 19 01:31:01 ifd ge-13/0/10 marked as gone
Jun 19 01:31:01 ifd ge-13/0/11 marked as gone
Jun 19 01:31:01 ifd ge-13/0/0 marked as gone
Jun 19 01:31:01 ifd ge-13/0/1 marked as gone
Jun 19 01:31:01 ifd ge-13/0/2 marked as gone
Jun 19 01:31:01 ifd ge-13/0/3 marked as gone
Jun 19 01:31:01 ifd ge-13/0/4 marked as gone
Jun 19 01:31:01 ifd ge-13/0/5 marked as gone
Jun 19 01:31:01 ifd ge-13/0/6 marked as gone
Jun 19 01:31:01 fpc detach 13
Jun 19 01:31:01 Clearing scc context
Jun 19 01:31:01 Setting scc context
Jun 19 01:31:01 PIC (fpc 13 pic 0) message operation: change. ifd count 0, flags 0 in mesg
Jun 19 01:31:01 Time to clean up PIC FPC 13, PIC 0
Jun 19 01:31:01 Clearing scc context
Jun 19 01:31:01 ignoring PIC message on LCC
Jun 19 01:31:01 Setting scc context
Jun 19 01:31:01 lcc_a40_update_ch_info_on_fpc_detach: On SCC: recvd fpc detach for fpc 1 belonging to ch_id 1, marking pics empty in ch_info
Jun 19 01:31:01 ch_info_pic_state_blob_set: ch_id 1, addflag 0x0 key 0x1000006 num_spu 1 num_npc 1 app_mode 0x0 ioc_npc_map 0xaa ch_info_version 0x1
Jun 19 01:31:01 PIC[7][0] => cp-flow combo PIC Up
Jun 19 01:31:01 PIC[10][0] => npc PIC Up
Jun 19 01:31:01 ch_info_update: UPDATE ch 1, fpc_slot 1, pic_slot 0, state 0x0 SUCCEEDED
Jun 19 01:31:01 ch_info_update: fpc_slot 1, pic_slot 0, ioc_npc_map 0xa
Jun 19 01:31:01 CHASSISD_IFDEV_DETACH_FPC: ifdev_detach(14)
Jun 19 01:31:01 ifd xe-14/0/0 marked as gone
Jun 19 01:31:01 ifd xe-14/0/1 marked as gone
Jun 19 01:31:01 fpc detach 14
Jun 19 01:31:01 Clearing scc context
Jun 19 01:31:01 Setting scc context
Jun 19 01:31:01 PIC (fpc 13 pic 0) message operation: delete. ifd count 0, flags 0 in mesg
Jun 19 01:31:01 pic_handle_message_idl: PIC fpc 13 pic 0 got deleted
Jun 19 01:31:01 Clearing scc context
Jun 19 01:31:01 ignoring PIC message on LCC
Jun 19 01:31:01 Setting scc context
Jun 19 01:31:01 lcc_a40_update_ch_info_on_fpc_detach: On SCC: recvd fpc detach for fpc 7 belonging to ch_id 1, marking pics empty in ch_info
Jun 19 01:31:01 ch_info_pic_state_blob_set: ch_id 1, addflag 0x0 key 0x1000006 num_spu 1 num_npc 1 app_mode 0x0 ioc_npc_map 0xaa ch_info_version 0x1
Jun 19 01:31:01 PIC[10][0] => npc PIC Up
Jun 19 01:31:01 ch_info_update: UPDATE ch 1, fpc_slot 7, pic_slot 0, state 0x0 SUCCEEDED
Jun 19 01:31:01 ch_info_update: fpc_slot 7, pic_slot 0, ioc_npc_map 0x0
Jun 19 01:31:01 CHASSISD_IFDEV_DETACH_FPC: ifdev_detach(20)
Jun 19 01:31:01 fpc detach 20
Jun 19 01:31:01 Clearing scc context
Jun 19 01:31:01 Setting scc context
Jun 19 01:31:01 PIC (fpc 14 pic 0) message operation: change. ifd count 2, flags 0x2 in mesg
Jun 19 01:31:01 Clearing scc context
Jun 19 01:31:01 Setting scc context
Jun 19 01:31:01 lcc_a40_update_ch_info_on_fpc_detach: On SCC: recvd fpc detach for fpc 10 belonging to ch_id 1, marking pics empty in ch_info
Jun 19 01:31:01 ch_info_pic_state_blob_set: ch_id 1, addflag 0x0 key 0x1000006 num_spu 1 num_npc 1 app_mode 0x0 ioc_npc_map 0xaa ch_info_version 0x1
Jun 19 01:31:01 ch_info_update: UPDATE ch 1, fpc_slot 10, pic_slot 0, state 0x0 SUCCEEDED
Jun 19 01:31:01 CHASSISD_IFDEV_DETACH_FPC: ifdev_detach(23)
Jun 19 01:31:02 fpc detach 23
Jun 19 01:31:02 Clearing scc context
Jun 19 01:31:02 Setting scc context
Jun 19 01:31:02 PIC (fpc 14 pic 0) message operation: change. ifd count 1, flags 0x2 in mesg
Jun 19 01:31:02 Clearing scc context
Jun 19 01:31:02 ignoring PIC message on LCC
Jun 19 01:31:02 Setting scc context
Jun 19 01:31:02 PIC (fpc 14 pic 0) message operation: change. ifd count 0, flags 0 in mesg
Jun 19 01:31:02 Time to clean up PIC FPC 14, PIC 0
Jun 19 01:31:02 Clearing scc context
Jun 19 01:31:02 ignoring PIC message on LCC
Jun 19 01:31:02 Setting scc context
Jun 19 01:31:02 PIC (fpc 14 pic 0) message operation: delete. ifd count 0, flags 0 in mesg
Jun 19 01:31:02 pic_handle_message_idl: PIC fpc 14 pic 0 got deleted
Jun 19 01:31:02 Clearing scc context
Jun 19 01:31:05 send: red alarm clear, device PEM 0, reason PEM 0 Not OK



James S. Smith, Network and Security Architect, Juniper Networks Certified Associate
WIND Mobile 207 Queen's Quay West, Suite 710 Toronto, ON M5J 1A7

Email: JSmith at WindMobile.ca
Direct: 416-640-9792






This message contains confidential information and is intended only for the individual named. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.



More information about the juniper-nsp mailing list