[j-nsp] LDP Interop with IOS

[Tim Warnock]

> We have a heterogeneous Juniper-Cisco environment where LDP seems to
> work with no known problems. It is significantly different from yours
> in that we have:
> 
> - IS-IS as our IGP
> - Juniper M320/MX and Cisco CRS1/IOS XR (and one 12K/IOS XR) P routers
> - Juniper M/MX and Cisco 12K/IOS as PE routers
> 
> If you're still interested in config examples send me an email.
> 
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no

I'm interested in some configs if you would - I burnt days on it and had no
luck.

I'm also interested in a l2circuit (martini circuit) <-> xconnect as well.

I did manage to get LDP up: there was a few setting on the cisco that needed
to be set (implicit null, matching MTU and force LDP binding to loop0) and I
used OSPF as my IGP, but I couldn't get a L2 circuit to come up.

This was SRX to ISR like OP.

Thanks
Tim.