[j-nsp] jnxOperatingCPU problem
Maria Cecilia Cena
mcena at ifxcorp.com
Tue Mar 15 13:35:00 EDT 2011
Hi,
Need to monitor RE1 and RE2 CPU usage via snmp using jnxOperatingCPU...but I don´t know why from both REs I received the same value (from router cli, I can see that values are not identical between the two REs). Here you can see:
XXXXX> show snmp mib walk jnxOperatingCPU.9
jnxOperatingCPU.9.1.0.0 = 96
jnxOperatingCPU.9.1.1.0 = 0
jnxOperatingCPU.9.2.0.0 = 96
jnxOperatingCPU.9.2.1.0 = 0
{master}
XXXXX > show chassis routing-engine
Routing Engine status:
Slot 0:
Current state Master
Election priority Backup
Temperature 39 degrees C / 102 degrees F
CPU temperature 39 degrees C / 102 degrees F
DRAM 640 MB
Memory utilization 87 percent
CPU utilization:
User 80 percent
Background 0 percent
Kernel 16 percent
Interrupt 4 percent
Idle 0 percent
Model RE-2.0
Serial ID 08000008bc167501
Start time 2009-09-02 16:04:57 UTC
Uptime 558 days, 23 hours, 30 minutes, 25 seconds
Load averages: 1 minute 5 minute 15 minute
1.06 0.84 0.50
Routing Engine status:
Slot 1:
Current state Backup
Election priority Master
Temperature 29 degrees C / 84 degrees F
CPU temperature 29 degrees C / 84 degrees F
DRAM 768 MB
Memory utilization 30 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 99 percent
Model RE-2.0
Serial ID 8b000007346e7801
Start time 2010-10-04 09:50:37 UTC
Uptime 162 days, 5 hours, 44 minutes, 35 seconds
Do you have any idea about this? Could it be related with graceful-switchover configured for routing-engine redundancy?
Thanks for your help!
Regards, Cecilia
More information about the juniper-nsp
mailing list