[j-nsp] P-1GE -B ethernet

[Jonas Frey (Probe Networks)]

They are neccessary for termination of (vlan)-ccc circuits. 
So if you just want to have mpls between two routers the non-B is fine.
Its just needed for ccc termination on endpoints.


Regards,
Jonas

Am Donnerstag, den 17.03.2011, 08:43 -0700 schrieb Chris Cappuccio:
> P-1GE-xx-B are necessary for ethernet-ccc services... I have a few -B and many non -B.  So....
> 
> Are the -B cards important for the connections _between_ MPLS capable routers, or on endpoints facing connections facilitated through ccc, or _both_ ?
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20110317/cffefae0/attachment.pgp>