[j-nsp] Uplink failure detection in EX series

[Chen Jiang]

Yes, it will come out in EX in 11.1 in Mar.

On Wed, Mar 16, 2011 at 12:16 AM, Richard A Steenbergen <ras at e-gerbil.net>wrote:

> On Tue, Mar 15, 2011 at 12:25:59PM +0100, Tore Anderson wrote:
> > Hi,
> >
> > I'm wondering if it possible to configure something equivalent to the
> > EX2500's Uplink Failure Detection on the JUNOS-based EX series
> > switches? I want to designate a couple of interfaces as uplink ports,
> > and if they all go down, all the other ports on the switch should be
> > disabled as well.
>
> I think uplink failure detection is on the roadmap for 11.1, though I'm
> not sure about the EX-specificness of it.
>
> --
> Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
> GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
BR!



           James Chen