[j-nsp] Recommended FW for MX80

[Doug Hanks]

I don't think we give out recommended releases for MX.  I personally use 10.4R2.6 with Trio supporting OSPF, ISIS, BGP and MPLS without major issues.

Doug

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Hahues, Sven
Sent: Thursday, March 24, 2011 10:30 AM
To: 'juniper-nsp at puck.nether.net'
Subject: [j-nsp] Recommended FW for MX80

Hi everyone,

I was just wondering if someone could tell me what the recommended FW for the MX 80 was?  I looked on the support site, but I only see recommended releases for EX switches, the J series and the SRX line.

Any insight would be appreciated!

Thanks in advance,

Sven


NETWORK SERVICES WILL NEVER ASK FOR YOUR PASSWORD.  You should never give out your username or password for any accounts you have, including bank accounts, credit card accounts, and other personal or University accounts.  Network Services will never contact you using a return e-mail address that is not @fgcu.edu.  If you receive a questionable e-mail or an e-mail asking for passwords and logon information, DO NOT RESPOND, and please contact the Help Desk at 239-590-1188.

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp