[j-nsp] Recommended FW for MX80

[Joel Jaeggli]

you can't run anything older than 10.2 on it.

given that it's a newish platform I'd go as fresh as is feasible.

joel

On 3/24/11 10:30 AM, Hahues, Sven wrote:
> Hi everyone,
> 
> I was just wondering if someone could tell me what the recommended FW for the MX 80 was?  I looked on the support site, but I only see recommended releases for EX switches, the J series and the SRX line.
> 
> Any insight would be appreciated!
> 
> Thanks in advance,
> 
> Sven
> 
> 
> NETWORK SERVICES WILL NEVER ASK FOR YOUR PASSWORD.  You should never give out your username or password for any accounts you have, including bank accounts, credit card accounts, and other personal or University accounts.  Network Services will never contact you using a return e-mail address that is not @fgcu.edu.  If you receive a questionable e-mail or an e-mail asking for passwords and logon information, DO NOT RESPOND, and please contact the Help Desk at 239-590-1188.
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>