[j-nsp] In-band ssh access to Juniper EX

[Chris Evans]

You need to watch out with routing. Mgmt and inband use the same routing
table.
On Mar 24, 2011 2:09 PM, "Henri Khou" <henri.khou at ehess.fr> wrote:
> Hello,
>
> I have a Juni EX-4200 with an out-of-band management interface
> configured. It works like a charm.
> Then I needed to connect to my switch through the Internet so I have
> treied to connect via ssh to a l3-interface but I failed miserably.
> Is there a limitation regarding l3-interace or a configuration statement
> that prevent in-band access?
>
> Thanks
>
> Henri
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp