[j-nsp] EX series and ipv6 multicast / mld.. Doesn't forward with IGMP-SNOOPING enabled

[Chris Evans]

Does anyone know when MLD Snooping will be available on Juniper products?

On Tue, Mar 29, 2011 at 10:15 PM, Chris Evans <chrisccnpspam2 at gmail.com>wrote:

> Check this out..
>
> *IGMP-SNOOPING Disabled*
>
> user at EX4200-1> show pfe route inet6 prefix ff00::/8
>
>
> IPv6 Route Table 0, default.0, 0x0:
>
> Destination                              Type     NH ID Interface
>
> ---------------------------------------- -------- ----- ---------
>
> ff00::/8                                  Resolve  1348
>
> ff02::/16                                mdiscard    43
>
> ff02::1                                     Mcast    39
>
> ff02::2                                     Mcast    39
>
> ff02::d                                     Mcast    39
>
> ff02::16                                    Mcast    39
>
> ff02::1:ff00:1                               Recv  1329 vlan.1
>
> ff02::1:ff68:3200                            Recv  1333 vlan.1
>
>
>
> *IGMP-SNOOPING Enabled*
>
> user at EX4200-1> show pfe route inet6 prefix ff00::/8
>
>
> IPv6 Route Table 0, default.0, 0x0:
>
> Destination                              Type     NH ID Interface
>
> ---------------------------------------- -------- ----- ---------
>
> ff00::/8                                  Resolve  1348
>
> ff02::/16                                mdiscard    43
>
> ff02::1                                     Mcast    39
>
> ff02::2                                     Mcast    39
>
> ff02::d                                     Mcast    39
>
> ff02::16                                    Mcast    39
>
> ff02::1:ff00:1                               Recv  1329 vlan.1
>
> ff02::1:ff68:3200                            Recv  1333 vlan.1
>
> *ff05::1:3:2001:xxxx:xxxx:xxxx:225:ff:fe4e:6c8e/256  mdiscard    43 <---
> This is my host sending ICMP to ff05::1:3 (well known dhcpv6)*
>
> *
> *
>
> *
> *
>
> On Tue, Mar 29, 2011 at 9:49 PM, Chuck Anderson <cra at wpi.edu> wrote:
>
>> "from ip-version" isn't a valid match type on EX4200 / 10.4R3.
>>
>> I've re-opened a JTAC case on this as well.
>>
>> On Tue, Mar 29, 2011 at 09:19:03PM -0400, Chris Evans wrote:
>> >
>> http://forums.juniper.net/t5/Ethernet-Switching/IPv6-multicast-not-forwarding-when-IGMP-SNOOPING-is-enabled/td-p/82812
>> >
>> > This guy posted a workaround.. Guess I'll try it and see if it helps..
>> >
>> > On Tue, Mar 29, 2011 at 2:03 PM, Chris Evans <chrisccnpspam2 at gmail.com
>> >wrote:
>> >
>> > > Opened a JTAC case to get some more attention on this.. They're
>> telling me
>> > > 11.4 due to some 'limitations'..
>> > >
>> > > Rather frustrating, seems like I'm always grinning teeth at JUNOS..
>> When
>> > > you need features, Juniper is lacking.. 18 to 24months behind everyone
>> else.
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>