[j-nsp] Cisco ACL converter

[Keegan Holley]

Have you thought about doing it manually?  Neither type of filter (assuming
you're not talking about route-maps or QOS policies) is that complex.  It
would probably take you longer to find a tool and use it than it would to
look up route-filters on the juniper website.

On Thu, Mar 31, 2011 at 4:50 AM, Nick Ryce <Nick.Ryce at lumison.net> wrote:

> Hi,
>
> This has probably been covered before but my google foo is letting me down.
>
> Is there a tool ( apart for the ios2junos translator ) that converts cisco
> ACLs to juniper?  The ios2junos translator has no concept of object groups
> and is unable to convert an acl line that has more than one port specified.
>  I have  a about 150 customer ACLS each with about 40 lines of code which I
> really don't want to do manually.
>
> Thanks.
>
> --
> Nick Ryce
> Network Engineer
> Lumison
> t: 0845 1199 900
> d: +44 131 514 4049
>
> P.S. Fancy some light reading? Clouds to networks, download a Lumison
> whitepaper now at http://www.lumison.net/why-lumison/whitepapers
>
>
> ________________________________
> --
>
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the sender. Any
> offers or quotation of service are subject to formal specification.
> Errors and omissions excepted. Please note that any views or opinions
> presented in this email are solely those of the author and do not
> necessarily represent those of Lumison.
> Finally, the recipient should check this email and any attachments for the
> presence of viruses. Lumison accept no liability for any
> damage caused by any virus transmitted by this email.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>