[j-nsp] MX-series Redundant RE - Unable to mask fxp0 down alarm

Paul Stewart paul at paulstewart.org
Sun May 1 20:42:02 EDT 2011


Hey Chris...

On MX480's running 10.0R3.10 we just have it setup as:

paul at core2.toronto1> show chassis alarms
No alarms currently active

paul at core2.toronto1> show configuration chassis alarm
management-ethernet {
    link-down ignore;
}

Thanks,

Paul


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Chris Kawchuk
Sent: Sunday, May 01, 2011 8:31 PM
To: juniper-nsp List
Subject: [j-nsp] MX-series Redundant RE - Unable to mask fxp0 down alarm

Forgive me if this is a known bug....I seem unable to mask the fxp0
management port down alarm for the Redundant RE - host 1. (works fine for
the primary RE - host 0).

Platform: MX480, JunOS 10.3R3.7

groups {
    re0 {
        chassis {
            alarm {
                management-ethernet {
                    link-down ignore;
                }
            }
        }
    }
    re1 {
        chassis {
            alarm {
                management-ethernet {
                    link-down ignore;
                }
            }
        }
    }
}
apply-groups [ re0 re1 ];


user at router> show chassis alarms 
1 alarms currently active
Alarm time               Class  Description
2011-04-07 11:19:35 EST  Major  Host 1 fxp0 : Ethernet Link Down


Known issue? Need to reboot the backup RE for this to take effect?
Cheers.

- Chris.



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list