[j-nsp] MX-series Redundant RE - Unable to mask fxp0 down alarm

[Brent Jones]

On Sun, May 1, 2011 at 6:00 PM, Chris Kawchuk <juniperdude at gmail.com> wrote:
> Heh. Good question! I just had to double check:
>
>> show config system
>        commit synchronize;
>
> Thats in there...... OK let's try it manually.....
>
> ckawchuk at jmx480# commit synchronize and-quit
> re0:
> configuration check succeeds
> re1:
> commit complete
> re0:
> commit complete
> Exiting configuration mode
>
> {master}
> ckawchuk at jmx480> show chassis alarms
> 1 alarms currently active
> Alarm time               Class  Description
> 2011-04-07 11:19:35 EST  Major  Host 1 fxp0 : Ethernet Link Down
>
> Yeah... alarm still there. No worries - it's just an annoyance more than anything.
>
> - Chris.
>
>
> On 2011-05-02, at 10:52 AM, OBrien, Will wrote:
>
>> Silly question... You did use commit sync, correct?
>>
>> Will O'Brien
>>
>> On May 1, 2011, at 7:51 PM, "Chris Kawchuk" <juniperdude at gmail.com> wrote:
>>
>>> Hi Paul..!
>>>
>>> Yeah - I tried that as well initially with no luck.... (and just tried again just now...)
>>>
>>> me at wowter> show configuration chassis
>>> alarm {
>>>  management-ethernet {
>>>      link-down ignore;
>>>  }
>>> }
>>>
>>> user at wowter> show chassis alarms
>>> 1 alarms currently active
>>> Alarm time               Class  Description
>>> 2011-04-07 11:19:35 EST  Major  Host 1 fxp0 : Ethernet Link Down
>>>
>>> ... Which now definitely leads me to suspect it's a bug in this release; as you don't seem have this issue in 10.0 =)
>>>
>>> Thanks! I'll ignore it for now, and see what happens when we do our 10.4 upgrade soon.
>>>
>>> - Chris.
>>>
>>>
>>>
>>> On 2011-05-02, at 10:42 AM, Paul Stewart wrote:
>>>
>>>> Hey Chris...
>>>>
>>>> On MX480's running 10.0R3.10 we just have it setup as:
>>>>
>>>> paul at core2.toronto1> show chassis alarms
>>>> No alarms currently active
>>>>
>>>> paul at core2.toronto1> show configuration chassis alarm
>>>> management-ethernet {
>>>> link-down ignore;
>>>> }
>>>>
>>>> Thanks,
>>>>
>>>> Paul
>>>
>>>
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

On EX switches, I've had the alarm get stuck. I had to restart
chassis-control and it went away

-- 
Brent Jones
brent at servuhome.net