[j-nsp] Class of Service on EX3200

[Ala' Amira]

Hi All,

 

Am tring to implement class of service on ex3200 switch with 2 forewading
classes but after  commiting the configuration and do show command it gave
me this warning 

-## Warning: statement ignored: unsupported platform (ex3200-24t). In
addition to the traffic is preveted totally from the lowest queue-num which
is wrong result.

 

So does this issue is an effect from the warning above or it is a limitation
on  EX 3200 or something wrong in the configuration in below,

 

 

LAB_Core# show firewall 

family inet {

    filter cos {

        term 1 {

            from {

                destination-address {

                    192.168.20.20/32;

                }

            }

            then {

                loss-priority low;

                forwarding-class L-L;

                accept;

            }

        }

        term 2 {

            from {

                destination-address {

                    192.168.20.30/32;

                }

            }

            then {

                loss-priority low;

                forwarding-class Wimax;

                accept;

            }

        }

        term 3 {

            then accept;

        }

    }

}

 

 

LAB_Core# show class-of-service                 

forwarding-classes {

    ##

    ## Warning: statement ignored: unsupported platform (ex3200-24t)

    ##

    class L-L queue-num 3 priority high;

    ##

    ## Warning: statement ignored: unsupported platform (ex3200-24t)

    ##

    class Wimax queue-num 2 priority high;

}

interfaces {

    ge-0/0/1 {

        shaping-rate 4m;

    }

}

scheduler-maps {

    SCHED-MAP {

        forwarding-class L-L scheduler L-L;

        forwarding-class Wimax scheduler Wimax;

    }

}

schedulers {

    L-L {

        transmit-rate 1m;

        shaping-rate 1m;

        buffer-size percent 2;

        priority strict-high;

    }

    Wimax {

        transmit-rate 3m;

        buffer-size percent 3;

        priority strict-high;

    }

}

 

set firewall family inet filter cos term 1 from destination-address
192.168.20.20/32

set firewall family inet filter cos term 1 then loss-priority low

set firewall family inet filter cos term 1 then forwarding-class L-L

set firewall family inet filter cos term 1 then accept

set firewall family inet filter cos term 2 from destination-address
192.168.20.30/32

set firewall family inet filter cos term 2 then loss-priority low

set firewall family inet filter cos term 2 then forwarding-class Wimax

set firewall family inet filter cos term 2 then accept

set firewall family inet filter cos term 3 then accept

 

set class-of-service forwarding-classes class L-L queue-num 3

set class-of-service forwarding-classes class L-L priority high

set class-of-service forwarding-classes class Wimax queue-num 2

set class-of-service forwarding-classes class Wimax priority high

set class-of-service interfaces ge-0/0/1 shaping-rate 4m

set class-of-service scheduler-maps SCHED-MAP forwarding-class L-L scheduler
L-L

set class-of-service scheduler-maps SCHED-MAP forwarding-class Wimax
scheduler Wimax

set class-of-service schedulers L-L transmit-rate 1m

set class-of-service schedulers L-L buffer-size percent 2

set class-of-service schedulers L-L priority l strict-high

set class-of-service schedulers Wimax transmit-rate 3m

set class-of-service schedulers Wimax buffer-size percent 3

set class-of-service schedulers Wimax priority strict-high

 

 

Regards,

Ala' Amira