[j-nsp] Code upgrade to 10.4R4.5

[Jared Mauch]

I'm sure someone from Juniper will say that going forward like this "isn't supported".

I recommend skipping the validate step and making sure you have good oob.  You can also try to find something where the upgrade path is supported, in theory you need to jump to 10.0 before 10.4 but i've found that if you use the jinstall that's not needed.

- jared

On May 11, 2011, at 12:38 PM, Cyn D. wrote:

> Hi list,
> 
> Tried to upgrade a M7i from 9.5R1.8 to 10.4R4.5, but validation failed:
> Using jbase-10.4R4.5.tgz
> 
> [: /var/validate/chroot/tmp/jbase/packages/jbase-10.4R4.5: unexpected operator
> 
> Verified manifest signed by PackageProduction_10_4_0
> 
> Using /var/validate/chroot/tmp/jbundle/jboot-10.4R4.5.tgz
> 
> Using jkernel-10.4R4.5.tgz
> 
> [: /var/validate/chroot/tmp/jkernel/packages/jkernel-10.4R4.5: unexpected operator
> 
> Verified manifest signed by PackageProduction_10_4_0
> 
> Using jcrypto-10.4R4.5.tgz
> 
> .
> 
> .
> 
> .
> 
> Verified jservices-idp-pic-10.4R4.5.tgz signed by PackageProduction_10_4_0
> 
> Creating /opt/sdk/service-packages/jservices-idp ...
> 
> Storing jservices-idp-pic-10.4R4.5.tgz in /var/sw/pkg ...
> 
> Link: /opt/sdk/service-packages/jservices-idp/jservices-idp-pic -> /var/sw/pkg/jservices-idp-pic-10.4R4.5.tgz...
> 
> Validating against /config/juniper.conf.gz
> 
> /usr/libexec/ld-elf.so.1: Shared object "libisc.so.2" not found, required by "mgd"
> 
> Validation failed
> 
> WARNING: Current configuration not compatible with ...
> 
> 
> 
> Tried again without "validate" option and it went through. The release note said there should not be any issue if upgrade from 9.0 and later. Just wondering if anyone else had the same issue? And if upgrade without "validation", would the configuration work fine with the new code? 
> 
> 
> 
> Thanks in advance.
> 
> 
> 
> Cindy
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp