[j-nsp] filter frames based on dot1p bits

[meryem Z]

Hello Community,

Is there any way to filter frames based on do1p marking on m-series routers ?   I need this to police vpls traffic in ingress.
I tried with the "user-vlan-1p-priority" command but it seems that it is not supported on m120, m7i and m10i platforms...


term 1 {
    from {
        ##
        ## Warning: statement ignored: unsupported platform (m120)
        ##
        user-vlan-1p-priority 3;
    }
    then policer max_ef_300k;
}



Thank you .