[j-nsp] Copy files to RE

[Matt Hite]

FWIW, I also experienced the same issue on an MX480 (with dual RE)
that I have been evaluating.

Performed the same operation on the other MX480 we have without issue.
Makes me think it's hardware -- perhaps storage related -- going
south.

On Tue, May 17, 2011 at 12:40 PM, Cyn D. <cynthia_dal at yahoo.ca> wrote:
> Thanks for all replied. It is a M120 with 9.5R1.8. It took about half hour
> to copy a jinstall file between two REs.
> ----- Original Message ----- From: "Phil Shafer" <phil at juniper.net>
> To: "Cyn D." <cynthia_dal at yahoo.ca>
> Cc: <juniper-nsp at puck.nether.net>
> Sent: Tuesday, May 17, 2011 3:51 PM
> Subject: Re: [j-nsp] Copy files to RE
>
>
>> "Cyn D." writes:
>>>
>>> I tried to copy(ftp) jinstall file to backup RE but for some reason the
>>> Mgmt port on bac
>>> kup RE is not responsive. Then tried to copy the file from master RE to
>>> backup RE but it
>>> takes for ever - more than half hour still not complete. Just wondering
>>> what is the bes
>>> t way to copy the big file in this situation?
>>
>> You can copy files between REs using "re0:xxx" and "re1:xxx" as src/dst:
>>
>> user at cli> file copy re0:/etc/motd /tmp/foo
>>
>> user at cli> file show /tmp/foo
>> --- JUNOS 11.2I built 2011-01-18 19:57:42 UTC
>> At least one package installed on this device has limited support.
>> Run 'file show /etc/notices/unsupported.txt' for details.
>>
>> Thanks,
>> Phil
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>