[j-nsp] netflow sampling problem in 10.2

[Matjaž Straus Istenič]

Hi there,

we've recently upgraded our MX routers to 10.2R3.10 (from 9.6). After that, netflow sampling based on firewall filters does not export any packets, not even to a local file. Total silence! We are sampling IPv4 packets ingress on all interfaces. Firewall filters work fine. The corresponding firewall filter terms still count bytes and packets, but no samples are seen.

Have some of you run into similar problems with sampled netflow on 10.2? Release notes do not mention anything similar.

Kind regards,
	Matjaž

---
Matjaž Straus Istenič, Arnes
http://www.arnes.si

Tel: +386 1 4798-877
Fax: +386 1 4798-878
matjaz.straus at arnes.si
MS6745-RIPE
PGP 490F3B4F 2009-10-21
Fingerprint = 6172 7BF8 B0B7 1F09 47B3  AFA3 0946 1701 490F 3B4F