[j-nsp] Ex4200 Routing Engine
Brendan Mannella
bmannella at teraswitch.com
Thu May 19 15:03:56 EDT 2011
My config shows..
services {
ssh {
connection-limit 10;
rate-limit 10;
}
And
processes {
web-management disable;
I assume 8986.9 is the number of hours the process has been running. Can I drop to the cli and kill the process id without breaking anything.
root at agg1:RE:0% ps -aux | grep httpd
nobody 46466 87.5 0.6 8176 5864 ?? R 2Feb10 539252:22.28 /packages/mnt/jcrypto-ex/usr/sbin/httpd -N
root 93359 0.0 0.1 2040 816 p0 R+ 3:01PM 0:00.01 grep httpd
-----Original Message-----
From: Paul Stewart [mailto:paul at paulstewart.org]
Sent: Thursday, May 19, 2011 2:35 PM
To: Brendan Mannella; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Ex4200 Routing Engine
Someone may correct me here but if http isn't enabled under System -->
Services then I believe it doesn't run at all....
Logged into a EX4200-VC running 10.0S12 and don't see it running at all ...
load is "average" for it...
paul at dis1.xxxxxxxxxx> show system processes extensive
last pid: 39531; load averages: 0.03, 0.05, 0.02 up 106+10:49:25
14:33:58
109 processes: 6 running, 84 sleeping, 19 waiting
Mem: 169M Active, 19M Inact, 90M Wired, 59M Cache, 110M Buf, 646M Free
Swap:
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
11 root 1 171 52 0K 16K RUN 2261.3 92.33% idle
849 root 1 8 0 81544K 26468K nanslp 113.8H 1.42% pfem
845 root 1 -9 0 13928K 4420K i2c_wt 59.7H 0.00% chassism
847 root 2 8 -88 63780K 7216K nanslp 56.1H 0.00% sfid
12 root 1 -20 -139 0K 16K RUN 834:48 0.00% swi7: clock
861 root 1 4 0 33972K 11440K kqread 660:05 0.00% rpd
870 root 1 96 0 5788K 2720K RUN 429:44 0.00% ppmd
14 root 1 -40 -159 0K 16K WAIT 331:34 0.00% swi2: net
paul at dis1.xxxxxxxxx> show system processes extensive | match httpd
{master:0}
Cheers,
Paul
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Brendan Mannella
Sent: Thursday, May 19, 2011 2:20 PM
To: Brendan Mannella; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Ex4200 Routing Engine
Actually. Sorry to reply to my own thread.
I see why..
root at agg1.pit1> show system processes extensive
last pid: 92762; load averages: 1.35, 1.23, 1.18 up 639+13:13:05
14:15:21
106 processes: 7 running, 80 sleeping, 19 waiting
Mem: 104M Active, 101M Inact, 56M Wired, 97M Cache, 110M Buf, 626M Free
Swap:
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
46466 nobody 1 132 0 8176K 5864K RUN 8986.9 85.50% httpd
614 root 1 124 0 13236K 4352K RUN 1536.8 6.64% chassism
722 root 1 8 0 79912K 18092K nanslp 625.2H 1.37% pfem
615 root 2 44 -52 62672K 5596K select 266.9H 0.05% sfid
11 root 1 171 52 0K 16K RUN 2342.0 0.00% idle
13 root 1 -20 -139 0K 16K RUN 87.7H 0.00% swi7: clock
12 root 1 -40 -159 0K 16K WAIT 32.3H 0.00% swi2: net
29 root 1 -52 -171 0K 16K WAIT 29.9H 0.00% irq43: i2c0
i2c1
745 root 1 4 0 8852K 6996K kqread 22.8H 0.00% eswd
737 root 1 96 0 4916K 1992K RUN 22.7H 0.00% ppmd
616 root 1 4 -20 7236K 5392K kqread 19.8H 0.00% vccpd
744 root 1 4 0 7340K 5668K kqread 409:57 0.00% lldpd
747 root 1 4 0 5452K 3832K kqread 385:21 0.00% mcsnoopd
28 root 1 -52 -171 0K 16K WAIT 342:59 0.00% irq2: mpfe1
I don't even use the web server, anyone know how to disable it? I would
assume this will fix it?
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Brendan Mannella
Sent: Thursday, May 19, 2011 2:17 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Ex4200 Routing Engine
All,
I have a pair of 4200's in a VC config. Just happened to look at the "show
chassis routing-engine" command the other day and saw...
root at agg1.pit1> show chassis routing-engine
Routing Engine status:
Slot 0:
Current state Master
Temperature 36 degrees C / 96 degrees F
DRAM 1024 MB
Memory utilization 19 percent
CPU utilization:
User 11 percent
Kernel 88 percent
Interrupt 1 percent
Idle 0 percent
Model EX4200-24T, 8 POE
Serial ID BM0208388984
Start time 2009-08-18 01:02:43 EDT
Uptime 639 days, 13 hours, 10 minutes, 15
seconds
Load averages: 1 minute 5 minute 15 minute
1.13 1.17 1.16
Routing Engine status:
Slot 1:
Current state Backup
Temperature 29 degrees C / 84 degrees F
DRAM 1024 MB
Memory utilization 14 percent
CPU utilization:
User 8 percent
Kernel 4 percent
Interrupt 0 percent
Idle 88 percent
Model EX4200-24T, 8 POE
Serial ID BM0208417115
Start time 2009-08-18 01:02:43 EDT
Uptime 639 days, 13 hours, 10 minutes, 15
seconds
Load averages: 1 minute 5 minute 15 minute
0.06 0.09 0.07
These are still running 9.3R4.4, is there some commands I could use to see
why the kernel is at 88%?
Thanks,
Brendan
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list