[j-nsp] SSH/Telnet session hanging

Santhosh S santhosh.anchan at gmail.com
Tue May 31 22:44:26 EDT 2011


Adnan,

Yes, the 10.3R2 should be able to wrap around the CLI problem. I've seen
similar oddities on my pair of MX960s a few weeks back. Did JTAC ever tell
you why they are recommending this version of JUNOS? Have they seen a bug in
the previous version? If yes then ask for a PR.

Best,
Santhosh


On Wed, Jun 1, 2011 at 1:48 AM, Muhammad Adnan Mohsin <adnanm at gmail.com>wrote:

> Hi Experts,
> I have a MX240 router installed at a remote location. I am able to
> telnet/SSH the router but when I run a command that needs to return a
> large output (e.g. show log messages or show conf) the session hangs
> and then I have to re-establish the connection. Because of this I
> couldn't provide some outputs that were required by JTAC. As long as
> the commands I give on the router don't have to return a large output,
> the session remains intact. The current code that I am running is
> 10.2R3.10. JTAC has recommended me to install 10.3R2 but I have a
> feeling that won't work. Has somebody experience a similar issue? I
> would appreciate if somebody could give me some guidance to
> troubleshoot this problem.
>
> thanks.
> Adnan.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
- Santhosh


More information about the juniper-nsp mailing list