[j-nsp] MC LAG experience ?

[David]

I meant to say 11.2R3.3, not 10.2.

On Mon, Oct 31, 2011 at 11:54 PM, David <webnetwiz at gmail.com> wrote:

> Trying this now for a customer, running 10.2R3.3. Currently seeing an
> issue with l2 subsystem crashing and throwing a core dump, got this issue
> escalated to ATAC.
>
> webnetwiz.
>
>
> On Sun, May 29, 2011 at 2:32 PM, <david.roy at orange-ftgroup.com> wrote:
>
>> Hi All,
>>
>> Somebody has experience regarding MX LAG on Juniper MX in 10.2 ?
>>
>> MC LAG in stanby-active for VPLS mode with LACP and ICCP configured ?
>> Does-it work ? Are-there any HW or SW requierements ? Some sample config
>> are welcome, too.
>> I tried to configure it with DPC combo card (20x1GE - 2x20GE). All the
>> configuration has commited but my LAG is still down.
>>
>> Thanks for your help.
>> Regards
>> David
>>
>> Hereafter my configuration :
>>
>> On MX 1 :
>>
>>  ae0 {
>>        encapsulation ethernet-vpls;
>>        aggregated-ether-options {
>>            link-speed 1g;
>>            lacp {
>>                active;
>>                system-priority 1;
>>                system-id 00:00:00:00:00:01;
>>                admin-key 12345;
>>            }
>>            mc-ae {
>>                mc-ae-id 1;
>>                redundancy-group 1;
>>                chassis-id 0;
>>                mode active-standby;
>>                status-control standby;
>>            }
>>        }
>>        unit 0;
>>    }
>>   ge-0/0/3 {
>>        speed 1g;
>>        link-mode full-duplex;
>>        gigether-options {
>>            802.3ad ae0;
>>        }
>>    }
>>  iccp {
>>        local-ip-addr 1.1.1.1;
>>        peer 2.2.2.2 {
>>            redundancy-group-id-list 1;
>>            liveness-detection {
>>                minimum-interval 1000;
>>            }
>>        }
>>    }
>>
>> On MX 2
>>
>>
>>  ae0 {
>>        encapsulation ethernet-vpls;
>>        aggregated-ether-options {
>>            link-speed 1g;
>>            lacp {
>>                active;
>>                system-priority 1;
>>                system-id 00:00:00:00:00:01;
>>                admin-key 12345;
>>            }
>>            mc-ae {
>>                mc-ae-id 1;
>>                redundancy-group 1;
>>                chassis-id 0;
>>                mode active-standby;
>>                status-control active; <<<<<<<<<<<<<<<<
>>            }
>>        }
>>        unit 0;
>>    }
>>   ge-0/0/5 {
>>        speed 1g;
>>        link-mode full-duplex;
>>        gigether-options {
>>            802.3ad ae0;
>>        }
>>    }
>>  iccp {
>>        local-ip-addr 2.2.2.2;
>>        peer1.1.1.1 {
>>            redundancy-group-id-list 1;
>>            liveness-detection {
>>                minimum-interval 1000;
>>            }
>>        }
>>    }
>>
>>
>> ********************************************************************************
>> IMPORTANT.Les informations contenues dans ce message electronique y
>> compris les fichiers attaches sont strictement confidentielles
>> et peuvent etre protegees par la loi.
>> Ce message electronique est destine exclusivement au(x) destinataire(s)
>> mentionne(s) ci-dessus.
>> Si vous avez recu ce message par erreur ou s il ne vous est pas destine,
>> veuillez immediatement le signaler  a l expediteur et effacer ce message
>> et tous les fichiers eventuellement attaches.
>> Toute lecture, exploitation ou transmission des informations contenues
>> dans ce message est interdite.
>> Tout message electronique est susceptible d alteration.
>> A ce titre, le Groupe France Telecom decline toute responsabilite
>> notamment s il a ete altere, deforme ou falsifie.
>> De meme, il appartient au destinataire de s assurer de l absence de tout
>> virus.
>>
>> IMPORTANT.This e-mail message and any attachments are strictly
>> confidential and may be protected by law. This message is
>> intended only for the named recipient(s) above.
>> If you have received this message in error, or are not the named
>> recipient(s), please immediately notify the sender and delete this e-mail
>> message.
>> Any unauthorized view, usage or disclosure ofthis message is prohibited.
>> Since e-mail messages may not be reliable, France Telecom Group shall not
>> be liable for any message if modified, changed or falsified.
>> Additionally the recipient should ensure they are actually virus free.
>>
>> ********************************************************************************
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>