[j-nsp] how to prepare JNCIE-SP lab

[sthaug at nethelp.no]

>  i have check ur doc yestersday.there are two question:
>  1.how to check mx box have tunnel service card. 

It probably doesn't - however, if you have a DPC or MPC you can 
configure the necessary tunnel "PIC". E.g. assuming a 20 port GigE
DPC in slot 0,

chassis {
    fpc 0 {
        pic 0 {
            tunnel-services {
                bandwidth 1g;
            }
        }
    }
}

will give you the necessary tunnels available at lt-0/0/10, gr-0/1/10,
ip-0/1/10, vt-0/1/10 etc. Yes, it is always 10.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no