[j-nsp] Does a L3VPN RR require routing-instance for each VRF?
Phil Mayers
p.mayers at imperial.ac.uk
Tue Nov 29 10:01:09 EST 2011
On 29/11/11 14:46, Per Granath wrote:
> If you are doing route target filtering (family route-target), then you may need to add the default target on the RRs:
>
> set ... protocols bgp ... family route-target advertise-default
We are not doing route target filtering.
I think I need to re-state my problem. I'm getting a lot of questions
(unicast, off-list) which indicate I have not explained myself correctly.
More information about the juniper-nsp
mailing list