[j-nsp] Change VLAN ID between two trunks?

[Kevin Shymkiw]

Chris,

You can swap VLAN Tags, if that is what you are looking to do.  Essentially
receive it on port ge-0/0/0 as VLAN 10 and send it out port ge-0/0/2 as VLAN
50.  This would allow the two switches connected to your EX to be configured
for a trunk of 10 and 50.


Kevin

On Fri, Sep 9, 2011 at 12:39 PM, Chris Adams <cmadams at hiwaay.net> wrote:

> While trying to solve a problem, I was wondering: is it possible to have
> two trunks connected to a switch (say an EX2200), and change a VLAN ID
> between them?
>
> For example, if trunk A has VLAN 10, but I want trunk B to carry the
> same traffic but in VLAN 50, is that possible?
> --
> Chris Adams <cmadams at hiwaay.net>
> Systems and Network Administrator - HiWAAY Internet Services
> I don't speak for anybody but myself - that's enough trouble.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>