[j-nsp] HDD Write Error

[Jonas Frey (Probe Networks)]

Hi,

you are correct, the disk exceeded the maximum write errors permitted by
the SMART value and thus is marked as bad. Prepare for a complete
failure of the drive soon (1-30 days likely).
May be the right time to upgrade the harddisk to a SSD.
http://juniper.cluepon.net/Replacing_the_harddisk_with_solid_state_flash

Best regards,
Jonas



Am Dienstag, den 20.09.2011, 17:09 +0200 schrieb Juniper GOWEX:
> Hi all,
> 
>  From yesterday at the log of my M20 are the following message :
> 
>         smartd[2595]:  Device: /dev/ad1a, Failed attribute: (200)Write
>         Error Rate
> 
> It´s informative, but i think that there is a problem with my HDD ( I 
> still have to run the smartd commands ) .
> 
> Somebody had this problem ?
> 
> 
> Best Regards
> 
> Isidoro
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <https://puck.nether.net/pipermail/juniper-nsp/attachments/20110920/a516c0ca/attachment-0001.pgp>