[j-nsp] MPLS ERX310 and Brocade XMR

[Tom Teeuwen]

Hello,

I'm trying to setup MPLS between an ERX310 and a Brocade XMR4000.

I receive the following error:
ldpGeneral (MPLS): [ldp_process_initialization_message]: PDU too small, from 1.10.1.1

1.10.1.1 is the loopback int on the brocade
1.10.1.2 is the loopback int on the ERX

Config
mpls ldp
!
mpls ldp discovery transport-address 1.10.1.2
!
mpls ldp interface profile default
mpls

Interface to the XMR:
interface gigabitEthernet 1/1.100
 vlan id 100
 ip address 1.1.1.2 255.255.255.252
 mpls
 mpls ldp
The MTU value is 1548

Kind regards,
Tom