[j-nsp] Juniper-MX-960-Using the same Ge-Port as L2 and L3 !

[vaibhava varma]

Dear All

Is there is a possibility in Juniper MX-960 to configure the same
Physical Port to support L2 Bridging ie Trunk Link and also configure
same time for L3 Routing ie Sub-interfaces.

It would look something like this as listed below

{master}[edit]
root at Junos# set interfaces ae1 unit 0 family ethernet-switching port-mode trunk
root at JUnos# set interfaces ae1 unit 0 family ethernet-switching vlan
members [ 71-73 573 ]
root at JUnos#set interfaces ae1 unit 79 vlan-id 79 family inet address 1.1.1.1/30

-- 
Regards
Varma