[j-nsp] l2vpn tagged PE port to untagged PE port

[Paul Stewart]

Hi folks.

 

Have built an l2vpn session but ran into an issue.  One side of the session
is handed off on a trunked port:

 

[edit interfaces ge-1/3/9]

flexible-vlan-tagging;

speed 100m;

encapsulation flexible-ethernet-services;

}

unit 444 {

    description "OTA Testing";

    encapsulation vlan-ccc;

    vlan-id 444;

}

 

The routing instance looks like this:

 

[edit routing-instances OTA-Testing]

instance-type l2vpn;

interface ge-1/3/9.444;

route-distinguisher xx.xx.xxx.71:444;

vrf-target target:11666:9444;

protocols {

    l2vpn {

        encapsulation-type ethernet-vlan;

        interface ge-1/3/9.444;

        site dis1.millbrook1 {

            site-identifier 71;

            interface ge-1/3/9.444 {

                remote-site-id 59;

            }

        }

    }

}

 

 

The other end though has an untagged port (straight Ethernet).  I cannot
figure out how to hand this off and keep getting an encapsulation mismatch
on the l2vpn session?

 

{master}[edit interfaces ge-2/1/3]

speed 100m;

link-mode full-duplex;

encapsulation ethernet-ccc;

unit 0;

 

Routing instance:

 

{master}[edit routing-instances OTA_Testing]

instance-type l2vpn;

interface ge-2/1/3.0;

route-distinguisher xx.xx.xxx.xx:444;

vrf-target target:11666:9444;

protocols {

    l2vpn {

        encapsulation-type ethernet;

        interface ge-2/1/3.0;

        site core1.toronto1 {

            site-identifier 59;

            interface ge-2/1/3.0 {

                remote-site-id 71;

            }

        }

    }

}

 

 

I contacted JTAC and they suggested a VLAN map to pop and push. this didn't
work . I previously had this labbed up and can't find my notes ;)

 

Layer-2 VPN connections:

 

Instance: OTA_Testing

  Local site: core1.toronto1 (59)

    connection-site           Type  St     Time last up          # Up trans

    71                        rmt   EM

 

 

Any thoughts on how I can fix this?

 

Appreciate it,

Paul