[j-nsp] Layer 2 feature on srx
Doug Hanks
dhanks at juniper.net
Tue Apr 10 01:17:39 EDT 2012
In the context of packet-mode, the family mpls is analogous to inet. This
is correct.
I suggest that the OP use "set vlan <name>" instead of "set bridge-domain
<name>" Also use "set interfaces vlan" instead of "set interfaces irb"
I'm not even sure why the SRX accepted this configuration.
Thank you,
--
Doug Hanks - JNCIE-ENT #213, JNCIE-SP #875
Sr. Systems Engineer
Juniper Networks
On 4/9/12 2:21 PM, "Phil Mayers" <p.mayers at imperial.ac.uk> wrote:
>On 04/09/2012 10:10 AM, bruno wrote:
>> not need to zone . coz i set it to packet mode
>
>Your config only shows packet-mode for "family mpls". IPv4 will still be
>flow mode.
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list