[j-nsp] R: Re: mc-ae problem

[nunziamai at tiscali.it]

Hi,

yes it is configured



----Messaggio originale----
Da: 
dhanks at juniper.net
Data: 04/04/2012 17.40
A: "nunziamai at tiscali.it"
<nunziamai at tiscali.it>, "juniper-nsp at puck.nether.net"<juniper-nsp at puck.
nether.net>
Ogg: Re: [j-nsp] mc-ae problem

Did you set your [switch-
options service-id] to something unique on both
ends?

MC-LAG isn't 
revertive via a nice CLI command, but you can disable the
standby ae 
link to force it back.

Thank you,

-- 
Doug Hanks - JNCIE-ENT #213,  
JNCIE-SP #875
Sr. Systems Engineer
Juniper Networks


On 4/4/12 7:37 
AM, "nunziamai at tiscali.it" <nunziamai at tiscali.it> wrote:

>hi guy,
>
>

>hav eyou experience of Mc-ae in release 11.2r4.14.
>
>i have 
>tested 
in this release two interfcaces connected in MC-ae with a NT450
>summit

>
>using this configuration:
>
>
>
>
>nunzia at re1# show protocols iccp
>

>
>local-ip-addr 10.10.10.;
>peer 10.255.254.183 {
>    redundancy-
group-id-
>list [ 4  ];
>    liveness-detection {
>        minimum-
interval 50;
>
>        multiplier 3;
>    }
>
>
>nunzia at test1-re0# 
show interfaces aex
>
>flexible-vlan-tagging;
>mtu 9192;
>encapsulation 
flexible-ethernet-
>services;
>aggregated-ether-options {
>    minimum-
links 1;
>    link-
>speed 1g;
>    lacp {
>        active;
>        
periodic fast;
>        
>system-priority 0;
>        system-id 00:00:
00:00:00:01;
>        admin-
>key 123;
>    }
>    mc-ae {
>        mc-
ae-id 104;
>        redundancy-
>group 4;
>        chassis-id 1;

>        mode active-standby;
>        
>status-control standby;
>    }

>}
>
>
>
>and 
>
>
>nunzia at test2-re0# show
>protocols iccp 
>local-ip-
addr 10.10.10.2;
>peer 10.10.10.1 {
>    session-
>establishment-hold-
time 60;
>    redundancy-group-id-list [ 4  ];
>    
>liveness-
detection {
>        minimum-interval 50;
>        multiplier 3;
>
>    
}
>}
>traceoptions {
>    file 201204_iccp size 1m;
>    flag event;
>

>    flag all;
>    flag pipe-detail;
>}
>
>
>
>{master}[edit]
>

>nunzia at test2re0# show interfaces ae7
>flexible-vlan-tagging;
>mtu 
9192;
>
>encapsulation flexible-ethernet-services;
>aggregated-ether-
options {
>
>    minimum-links 1;
>    link-speed 1g;
>    lacp {

>        active;
>
>        periodic fast;
>        system-priority 0;

>        system-id 00:
>00:00:00:00:01;
>        admin-key 123;
>    }

>    mc-ae {
>        mc-ae-
>id 104;
>        redundancy-group 4;

>        chassis-id 0;
>        mode 
>active-standby;
>        status-
control active;
>    }
>}
>
>
>
>but the MC-ae 
>is recertive?
>
>

>tnks 
>nunzia
>
>
>
>
>
>Invita i tuoi amici e Tiscali ti premia! Il 
consiglio di un amico vale
>più di uno spot in TV.Per ogni nuovo 
abbonato 30 € di premio per te e per
>lui! Un amico al mese e parli e 
navighisempre gratis:
>http://freelosophy.tiscali.it/
>

>_______________________________________________
>juniper-nsp mailing 
list juniper-nsp at puck.nether.net
>https://puck.nether.
net/mailman/listinfo/juniper-nsp






Invita i tuoi amici e Tiscali ti premia! Il consiglio di un amico vale più di uno spot in TV.Per ogni nuovo abbonato 30 € di premio per te e per lui! Un amico al mese e parli e navighisempre gratis: http://freelosophy.tiscali.it/