[j-nsp] About Juniper MX10 router performance

[Md. Jahangir Hossain]

Thanks to all for putting your valued information.



________________________________
 From: Paul Stewart <paul at paulstewart.org>
To: 'Md. Jahangir Hossain' <jrjahangir at yahoo.com>; 'Jonathan Lassoff' <jof at thejof.com> 
Cc: juniper-nsp at puck.nether.net 
Sent: Monday, April 23, 2012 8:30 PM
Subject: RE: [j-nsp] About Juniper MX10 router performance
 
Sorry - I thought it was M10i you were talking about...

On the MX80 side this it the largest we have at the moment is around 650k
BGP routes.

Paul



-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: April-23-12 6:03 AM
To: 'Md. Jahangir Hossain'; 'Jonathan Lassoff'
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] About Juniper MX10 router performance

The 1.6 million sounds around right but have nothing to confirm it.  The
largest table we have  running on an M10i looks like this:

Table          Tot Paths  Act Paths Suppressed    History Damp State
Pending
inet.0            549751     410074          0          0          0
0
bgp.l3vpn.0            0          0          0          0          0
0
bgp.l2vpn.0            0          0          0          0          0
0
inet6.0            65318      63375          0          0          0
0

Not sure if that helps or not - memory consumption sits around 50% 

That's from an M10i running RE850 cards...

Paul


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Md. Jahangir
Hossain
Sent: Monday, April 23, 2012 2:53 AM
To: Jonathan Lassoff
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] About Juniper MX10 router performance

Thanks  jonathan to reach you again.

Actually i need to confirmation how many  BGP routes this model can handle.

In some of forum i found 1.6million but in juniper site i can not found this
information.

So i am a little bit confused that way i  need to know the practical
information if  any one used this product related to this service.





thanks
jahangir







________________________________
From: Jonathan Lassoff <jof at thejof.com>
To: Md. Jahangir Hossain <jrjahangir at yahoo.com>
Cc: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Sent: Monday, April 23, 2012 12:42 PM
Subject: Re: [j-nsp] About Juniper MX10 router performance

On Sun, Apr 22, 2012 at 10:24 PM, Md. Jahangir Hossain
<jrjahangir at yahoo.com> wrote:
> Dear valued member:
>
>
> Wishes all are fine.
>
>
> i need
> suggestion from you about Juniper MX10 router performance who already 
> implement this. i want to buy  this router for IP Transit provider 
> where i received  all global routes .
>
>
> it would be nice please put your valued suggestion about this issue .

Jahangir -- we spoke briefly about this on NANOG just now as well.

Do you have a specific question about the MX10? What is it that you're
trying to accomplish?

--j
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp