[j-nsp] srx branch - dhcp on vlan interface with multiple ipv4 addresses

[pkc_mls]

Hi all,

I had an issue with an srx100 device.

I configured dhcp server for a range 192.168.31.0/24. (internal lan).

My internal interfaces are part of an ethernet-switching config.

The vlan.192 interface has 192.168.31.1/24 as IP.

When I add an IP to my vlan interface on a different subnet (let's say 
10.168.31.1/24),
the dhcp doesn't work anymore for the  first range. (even if the 
192.168.31.1 is marked as primary and prefererd);

log shows the following :
Jul  5 06:58:28 -- looking for pool with subnet 10.168.31.1, prefix 
length 32
Jul  5 06:58:28 unable to find pool for address `10.168.31.1' on 
interface `vlan.192'

This was tested on 10.4, 11.4 and 12.1.

Does anyone know if this is by design or if I am missing something in my 
configuration ?

thanks