[j-nsp] Selective packet mode & local traffic

[Phil Mayers]

Unless I'm missing a trick, apply-paths in a prefix list pulls the netmask in when applied to interface ips. This is ok for lo0 filters, but not those on transit interfaces.

Wayne Tucker <wayne at tuckerlabs.com> wrote:

>You can probably achieve that using apply-path.  This book has several
>good examples:
>
>http://www.juniper.net/us/en/community/junos/training-certification/day-one/fundamentals-series/securing-routing-engine/
>

-- 
Sent from my mobile device, please excuse brevity and typos.